Motordante
Hand Grinder Motor

The Comandante C40 MKIII Nitro Blade is a great hand grinder. It gives very homogeneous results in many grind ranges. This is great. Electric grinders are also quite expensive. It is becoming increasingly impossible for a standard home barista to buy an electric grinder as homogeneous and consistent as Comandante in today’s conditions. At this point, Motordante is here to offer us a realistic solution.

Although the engine is technically only an electric motor, the Comandante C40 MKIII has a special place because it is specially designed for the Nitro Blade Hand Grinder and contains many additional features to protect the grinder.

Motordante,
A Different Dimension in the Mill

Although the engine is technically only an electric motor, the Comandante C40 MKIII has a special place because it is specially designed for the Nitro Blade Hand Grinder and contains many additional features to protect the grinder.

Soft-Start / Stop is included in Motordante to prevent the motor from making sudden movements when you press the button or cut off the power suddenly. Motordante’s purification from sudden movements plays an important role in simulating a human to your Comandante C40 MKIII Nitro Blade hand grinder. This is very important to protect the grinder case and blades.

The Motordante allows you to add coffee beans from the funnel while the engine is running, in other words while the grinder is turning, with its 12 millimeter diameter tunnel. You will be very surprised at the results as this is something we cannot do when turning the grinder manually. Coffee beans can be grinded much more homogeneously without any extra pressure.

The Motordante has the same dimensions as the Comandante C40 MKIII Nitro Blade hand mill. Both are 61.5 millimeters in diameter and their apparent height when combined. They are like brothers. (: The part that allows Motordante to hold onto the Comandante C40 MKIII Nitro Blade hand grinder fits the 3-legged plastic part at the top of the Comandante C40 MKIII Nitro Blade hand grinder with a total tolerance of 0.2 mm, so that the power is distributed exactly evenly during the grinding.

The direct current motor in Motordante with a reduction ratio of 1: 100 operating with 24V voltage rotates between 80 and 96 times in 1 minute. We spin the Comandante C40 MKIII Nitro Blade hand grinder at these speeds on average.

Motordante’s maximum torque is about 2.65 N / m. This value actually means the following; If your Comandante C40 MKIII Nitro Blade hand grinder slips out of your hand while you are grinding a coffee, the engine will probably stop when it encounters the same power. Keeping the power at this limit is also very important in that the part that Motordante attaches to the Comandante C40 MKIII Nitro Blade hand grinder is not deformed.

landing-pixel-specification-opt

Use

Although the Motordante will simulate the Comandante, we strongly recommend that the coffee beans be added afterwards. There is a very important reason for this; When the Comandante C40 MKIII Nitro Blade hand grinder is manually turned, we shake it. This is a situation that prevents the beans from getting in the blades to some extent. In use with motordante, if the beans are in the Comandante C40 MKIII Nitro Blade hand grinder, the coffee beans apply great pressure to the blades as the grinder is stationary. This causes both the overstrain of the Motordante and the exceeding of the grinding capacity of the Comandante C40 MKIII Nitro Blade hand grind one bean per revolution, and also adversely affects the grinding homogeneity. Therefore; It is very important to combine the beans with the Comandante C40 MKIII Nitro Blade hand grinder from Motordante's hopper, at a speed that slows down as the grinding setting gets thinner and accelerates as the grinding setting gets thicker. This way of use will protect both the Motordante and your Comandante C40 MKIII Nitro Blade hand grinder and will ensure that you do not have any problems.
landing-pixel-woterproof-opt

The motordante, with its 12 millimeter diameter tunnel, allows you to calmly add the coffee beans from the hopper while the mill rotates.

power

0,2 mm tolerance

power

24V voltage

power

1:100 reduction

    0%
    power

    2,65 N/m Torque

    power

    80 and 96 speed

    power

    61.5 millimeters in diameter